Touch_Probe2_Negative_Edge_Counter

Index.Sub	60D8.0H
Data Type	Unsigned16
Access	Read Only
PDO Mappable	No
Unit	--
Range	Unsigned16
Default Value	0
Store Supported	No
Description	This object provides a continuous counter that is incremented with each negative edge at touch probe 2. The counter is only valid if Touch probe input is enabled (Touch_Probe_Function (60B8.0H), Bit8=1)  and continuous touch probe mode is enabled (60B8.0H, Bit9 =1).
Notes	This object is available with firmware V01r11 or superior. See Touch Probe functionality.